An ideal solution for high traffic applications that require improved traction, easy cleaning and is budget friendly.

Quality is the Foundation of Everything We Do
Call Us for a Quote



Request A Quote

Let’s get started. Let us know how we can help you and we’ll be in touch as soon as possible.
High Performance epoxy is overlaid by a unique blend of aliphatic polyurethane and super fine powdered aluminum aggregate. The seal coat creates a long lasting matte finish that resists wear patterns, and has high chemical resistance.
Whether you need a decorative floor coating systems that can withstand high traffic volumes or improves traction under foot, we have the combination of beauty and strength that you need. You will benefit for years to come from eye-catching flooring that is as durable as it is attractive.


RexTough Hard Wear floor coatings are a specially formulated blend of epoxy and aggregates used to enhance the functional and aesthetic properties of seamless, resin-based, flooring systems. This unique product can be custom blended to a wide array of colors to match any design palette.

RexTough Hard Wear floors are quickly gaining popularity amongst architects, designers, contractors and building owners, because of their unique properties that deliver complete customization to commercial, residential and industrial floors with a wide range of colors, textures and sizes. Never before has a decorative floor covering been so durable, economical, easy to clean and hygienic all at the same time.


Step 1
Profile entire concrete floor by shot blasting or diamond grinding. By “opening” the concrete and creating a profile we ensure the concrete and epoxy are properly bonded.
Step 2
Cracks in concrete are opened using a concrete saw and then filled. We also complete concrete restoration work at this stage, this could include repairing damage like surface spalling.
Step 3
Construction joints in the concrete may be filled at this time.
Step 4
The surface is thoroughly cleaned to remove any dust or debris.
Step 5
We apply a high quality, high solids, Epoxy base coat @ 10-12mils.
Step 6
Next we lay down a color tinted epoxy mid coat @ 12-15 mils.
Step 7
After the epoxy has cured over night we apply a blend of polyurethane and fine aluminum aggregate @ 3lbs per gallon.
Step 8
The floor must be allowed to cure for 24 hours before foot traffic can resume and 1 week before vehicle traffic resumes.
Step 9
Floors require little more than normal cleaning. If required, Rexbright Hard Wear can be easily renewed with an additional polyurethane top coat.


Over 200 colours available! Contact us for more details.

Request A Quote

Let’s get started. Let us know how we can help you and we’ll be in touch as soon as possible.
error: Content is protected !!
Scroll to Top

Quote Form